HP FP15, FP7317 manual Entering User Modes, Energy Saver Feature

Technical Specifications

vf17, FP17, L1702, f1723, and FP7317 Models

17-inch Flat Panel Monitors (Continued)

Altitude:
Operating	0 to 12,000 feet	0 to 3657.6 m
Non-operating	0 to 40,000 feet	0 to12192 m
Power Consumption	<50 watts typical
Input Terminal	15-pin D-type connector with cable included.

Entering User Modes

The video controller signal may occasionally call for a mode that is not preset if:

■You are not using a standard graphics adapter.

■You are not using a preset mode.

If this occurs, you may need to readjust the parameters of the monitor screen by using the on-screen display. Your changes can be made to any or all of these modes and saved in memory. The monitor automatically stores the new setting, then recognizes the new mode just as it does a preset mode. In addition to the 16 factory preset modes, there are four user modes that can be entered and stored.

Energy Saver Feature

When the monitor is in its normal operating mode, the Power light is green.

The monitor also supports a reduced power state. The reduced power state is entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen blanks, the backlight turns off, and the Power light turns amber.

B–4 User’s Guide