Operating the Monitor
Adjusting Screen Quality
Allow the monitor to warm up for 20 minutes before performing the following procedures.
The Auto-adjustment feature automatically fine-tunes the image quality each time a new video mode is displayed. If additional image quality improvement is desired, run the Auto-Adjust software on the CD and press the – (Minus) button on the monitor front panel to manually activate the Auto-Adjustment function.
For more precise adjustments, run the Auto-Adjust software on the CD, and use the Clock and Phase controls of the monitor to fine-tune the image.
Optimizing Digital Conversion
This monitor contains advanced circuitry that allows the flat panel screen to function like a standard monitor. Two controls in the on-screen display can be adjusted to improve image performance: Clock and Clock Phase. Use these controls only when the auto-adjust function does not provide a satisfactory image.
✎The Clock must first be set correctly since the Clock Phase settings are dependent on the main Clock setting.
■Clock—Increase/decrease the value to minimize any vertical bars or stripes visible on the screen background.
■Clock Phase—Increase/decrease the value to minimize video distortion or video jitter.
✎When using the controls, you will obtain the best results by using the Auto-Adjustment software.
