Setting Up the Monitor
Mounting the Monitor
1.Remove the monitor base. Refer to “Removing the Monior Base” steps in the previous section.
After the base is removed from the monitor, four threaded mounting holes are exposed on the monitor back panel to be used for mounting purposes. These mounting holes are spaced 75 or 100mm apart and are compliant with the Video Electronics Standards Association (VESA) standard for mounting flat panel displays. The 75mm VESA hole pattern supports the 15” monitors only, and the 100mm hole pattern supports the 17” monitors only.
2.Mount the monitor to a swing arm or other mounting fixture by following the instructions included with the mounting fixture to be used.
User’s Guide |
