Setting Up the Monitor
Removing the Monitor Base
You can remove the monitor base to mount the monitor on a wall, a swing arm, or other mounting fixture. Read the Caution and Warning statements below before beginning the procedure.
ÄCAUTION: Before beginning to disassemble the monitor, be sure the monitor is turned off and the power and signal cables are both disconnected. If your monitor has a connected audio cable, disconnect it.
ÄCAUTION: Do not remove the base from the monitor while the monitor is in the upright position. Lay the front bezel down on a soft area to prevent it from getting scratched, defaced, or broken.
1.Disconnect and remove the signal and power cables from the back of the monitor.
2.Remove the stand cap 1 from the top of the pedestal pillar.
User Guide |
