Optical drive

NOTE: The optical drive spare part kit includes a bezel and bracket.

Description

Spare part number

 

 

Blu-ray ROM DVD±R/RW Super Multi Double-Layer Drive

681814-001

 

 

DVD±RW and CD-RW Super Multi Double-Layer Combo Drive

681815-001

 

 

Optical drive cable kit

682742-001

 

 

Before removing the optical drive, follow these steps:

1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.

2.Disconnect all external devices connected to the computer.

3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet and then unplugging the AC adapter from the computer.

4.Remove the battery (see Battery on page 32).

5.Remove the service door (see Service door on page 33).

Remove the optical drive:

1.Using a small Phillips screwdriver, remove the PM 2.5 x 6.5 screw (1) that secures the optical drive to the computer.

2.Insert a screwdriver or other narrow tool through the release access hole (2) in the bottom of the computer. Push the rear of the optical drive until it is released.

34 Chapter 4 Removal and replacement procedures

Page 42
Image 42
HP g6-1b6n8r QA059UAR#ABA manual Optical drive