5.If it is necessary to replace the display bezel or any of the display assembly subcomponents:
a.Remove the plastic screw covers (1) and the two PM 2.5 × 3.5 screws (2) that secure the display bezel to the display assembly.
b.Flex the inside edges of the top edge (1), the left and right sides (2), and the bottom edge (3) of the display bezel until the bezel disengages from the display enclosure.
c.Remove the display bezel (4).
6.If it is necessary to replace the webcam/microphone module:
a.Detach and release the webcam/microphone module (1) as far as the webcam/microphone module cable allows. (The webcam/microphone module is attached to the display enclosure with
b.Disconnect the webcam/microphone cable (2) from the webcam/microphone module.
58 Chapter 4 Removal and replacement procedures
