Using the Fingerprint Reader

Set “No password” for Logon

In this mode, you are not required to enter a PIN, password, or fingerprint to log on.

1.From the Start menu, tap Settings, and then Password.

2.Select “No password” from the down arrow list.

3.Tap OK.

4.Tap Yes to save the changes.

ÄCAUTION: In the event that an incorrect or unsuccessful PIN, password, and/or fingerprint is repeatedly or incorrectly entered, all data and programs stored in RAM are erased and the iPAQ Pocket PC is returned to the as-shipped configuration. It is recommended that you back up all data frequently when using the security features.

Set “Simple 4 digit PIN” for Logon

In this mode, you are required to enter a 4-digit PIN to logon.

1.From the Start menu, tap Settings, and then Password.

2.Select “Simple 4 digit PIN” from the down arrow list.

3.Select from the down arrow list the length of time the

iPAQ Pocket PC can remain unused before you must reenter the PIN.

Reference Guide

5–11