Using the Fingerprint Reader
3.Select from the down arrow list the length of time the
iPAQ Pocket PC can remain unused before you must reenter the password.
4.Enter seven alphanumeric characters in the Password field.
5.Repeat step 4 in the Confirm field.
6.Tap OK.
7.Tap the finger to enroll.
8.Swipe the selected finger, as instructed.
✎For more information on finger swiping, see the section “Enroll a Finger print” or tap the Training button.
9.Tap OK.
10.Tap Yes to save changes.
Set “Password AND Fingerprint” for Logon
In this mode, you are required to enter both a password with at least seven characters and a fingerprint to logon.
✎The alphanumeric password must contain a combination of uppercase and lowercase letters, numbers, and punctuation.
1.From the Start menu, tap Settings, and then Password.
2.Select “Password AND fingerprint” from down arrow list.
3.Select from the down arrow list the length of time the iPAQ Pocket PC can remain unused before you must reenter the password.
4.Enter seven alphanumeric characters in the Password field.
5.Repeat step 4 in the Confirm field.
Reference Guide |