Acer G301 manual 111

	111
Status	Displays the health of the array. The array health status can be
	one of the following:
	On Line - Working within normal parameters.
	Off Line - All drives have failed.
	Deteriorated - One of the drives has failed.
Logical Drive	Displays the logical drive letters or volume names.
Stripe Size	Displays the stripe size. A stripe size is the minimal amount of
	data that can be written to the drive in one write.
	Note: RAID level 1 does not have a stripe size parameter. Stripe
	size parameters are available for RAID level 0 and RAID level 10
	array sets only. The stripe size parameter can be set only when
	the array is created. See the user’s guide for your IDE Software
	RAID IDE controller for more information.
Capacity	Displays the actual size of the array. This size is reported to
	Operating System.
Error Threshold	This parameter is user defined. Users can define the error
	threshold on each drive. For more information on how to set
	the error threshold, see the Advanced menu description.
Constituent Physical	Displays the physical drives joined to an array.
Drives

To exit this page, click on Config View or Scan Devices.