104 | 5 Configuring IDE Software RAID |
Physical Drive Properties - This screen displays the physical drive properties. The table following provides a description of each field. To exit this page, click on Config View or Scan Devices.
Field | Description |
|
|
Firmware | Specifies the firmware version of the physical drive. |
|
|
Status | Specifies gives the status of the physical drive. (online or offline) |
|
|
Errors | Specifies gives the number of errors in the physical drive. |
|
|
S.M.A.R.T. Status | Specifies the S.M.A.R.T. |
| technology) status of the physical drive. S.M.A.R.T. helps monitor |
| and predict the reliability and performance of the hard drive. |
| The options for this are Disabled, OK, or Error. |
| Disabled means S.M.A.R.T. is off and physical drive does not collect |
| statistical data. |
| OK means S.M.A.R.T. is on and no errors found. |
| Error status means S.M.A.R.T. is on and some errors found; this is a |
| serious warning that means the drive has to be replaced. |
|
|
Logical Drive | Specifies the logical drive information about this physical drive. (by |
| drive letter or volume) |
|
|
