HP hn200e manual Dhcp Clients Table Screen

DHCP

Gateway is 192.168.1.1, the starting IP address must be 192.168.1.2 or greater.

❑Number of DHCP users: Enter the maximum number of devices to which you want the DHCP server to assign IP addresses. Accept the default value or you may enter a number up to a maximum of 253. The maximum number depends on the starting IP address, so the total number must be chosen such that the starting IP address + the number of DHCP users –1 is equal to or less than 254 (which is the maximum value).

❑DHCP Clients Table: Click DHCP Clients Table to show current DHCP client information. This information is stored in temporary memory since it changes periodically, so the list of clients could disappear, as shown on the following screen:

DHCP Clients Table Screen

59