Auto Preset
1.3or 4Press BAND to select the desired band.
2.Hold down MEMORY for about 3 seconds.
3.The tuner automatically begins scanning, and stores the first 30 strong signals it receives.
4.Scanning stops automatically after radio stations have been stored in the auto preset memory.
Note: Press MEMORY again to stop auto scanning sooner.
To store stations on the other band, repeat Steps
Switching Between Preset Stations and Manual Tuning
3or 4If you store preset stations, pressing PRESET )or - (or TUNING/PRESET )# or ,- on the receiver) scrolls through the preset stations, rather than changing the frequency station by station.
To switch to scrolling by individual stations, press
then repeatedly press PRESET )or - (or TUNING/PRESET )# or ,- on the receiver) quickly to change the frequency by one step. Or hold down PRESET )or - to tune to the next clear station.
To switch back to scrolling through the preset stations, press TUNING MODE, then repeatedly press PRESET )or - (or TUNING/PRESET )# or ,- on the receiver) until you reach the desired station.
Listening to Preset Stations
3or 4To listen to a radio station stored in memory,
press TUNING MODE then PRESET )or
PRESET )#
PLAYING AUDIO CDS
You can use the receiver’s
Important: You can only use audio CDs with the receiver. CD- ROM,
1.3or 4Press POWER. The last selected function appears.
2.Press DVD/CD, or rotate FUNCTION (on the receiver) until :L:%9: appears.
3.On the receiver, press DISC 1, DISC 2, or DISC 3 to open the desired drawer.
4.Place the desired CD in the tray. Press the appropriate DISC button again to close the drawer. The selected CD’s number begins to flash.
Caution: Do not press on the drawers to close them. Doing so can damage the drawers.
Note: If you want to load more than one CD, you can press another DISC button. The receiver closes the open drawer and opens the drawer of the DISC button you pressed.
5.To play the selected CD, press PLAY. The disc icon (at the far left) begins to rotate.
6.To select a different CD, press DISC SKIP. The currently selected CD’s number blinks and BE7:?D= appears. To skip to the next CD, press DISC SKIP again while BE7:?D= flashes.
Note: If BE7:?D= has stopped flashing, you must wait until the CD loads, then press DISC SKIP again.
Once the desired CD has loaded, it automatically plays.
7.To pause playback, press MEMORY/f(or PAUSE on the receiver).To resume playback, press MEMORY/f (or PAUSE) again or press BAND/ J (or PLAY on the receiver).
To move forward through a track, hold down PRESET
TUNING/PRESET ,- (on the receiver) for about 2 seconds. Repeat up to two times to increase the fast- forward speed. To resume playback, press BAND/ J (or
PLAY).
To move backward through a track, hold down PRESET ), or TUNING/PRESET )ý#(on the receiver)ýfor about 2 seconds. Repeat up to two times to increase the rewind speed. To resume playback, press BAND/ Jý(or PLAY).
Note: At the beginning or end of a track on an audio CD, the scan speed returns to normal.
To skip to the next track on the CD, press PRESET
To return to the beginning of the current track, press PRESET ), or TUNING/PRESET )ý#(on the receiver).
To return to the previous track, press PRESET ), or TUNING/PRESET )ý#(on the receiver)ýtwice.
To stop playback, press FM MODE/ 'ýor STOP (on the receiver). The disc icon stops rotating, and H;IKC; appears. To resume playback, press BAND/ Jý(or PLAY). To stop playback completely, press FM MODE/ ' or STOP again.
Continuous Play
When the receiver finishes playing an audio CD, it automatically plays the disc in the next tray.
Repeat Play
Important: You must have a disc in all three trays to use 
:?I9ý7BBý(repeat all discs). Otherwise, the receiver stops when it reaches an empty tray.
203— Use the remote for these steps. 4— Use the receiver for these steps. 3or 4— Use either device for these steps.