Owner’s Operation and Maintenance Manual
Recessed Side Entry Bath Tubs
Model Model
DEALER This manual MUST be given to the user of the tub
Customer Service ‐ 1‐800‐668‐2337 Technical Support ‐ 1‐800‐668‐2337
ACCESSORIES WARNING
For further information on this product, please call the following
TABLE OF CONTENTS
TABLE OF CONTENTS
FEATURES
SECTION 2-PARTS AND INSTALLATION
TABLE OF CONTENTS
TABLE OF CONTENTS
Removing Soap Film and Hard Water Deposits
Removing Calcium Deposits, Scale and Lime Build-up
SPECIAL NOTES
LABEL LOCATION
LABEL LOCATION
Recessed Side Entry Bath Tubs
TYPICAL PRODUCT PARAMETERS
TYPICAL PRODUCT PARAMETERS
FEATURES
FEATURES
3750
Shower ON
3800
FEATURES
Shower ON
Whirlpool
Important Safety Instructions
Installation
SECTION 1-GENERAL GUIDELINES
DANGER
Electrical
Plumbing
DANGER
Grounding
Disinfecting
Maintenance and Inspection
DANGER
Operation
DANGER
SECTION 2-PARTS AND INSTALLATION
About Installation
NOTE For this procedure, refer to FIGURE
Parts Information
Installing the Tub
NOTE Follow recommended floor plan when installing tub FIGURE
B. Plumb the supply line to the diverted output port of the mix valve
NOTE For this procedure, refer to FIGURE 2.5 on page
Electrical and Plumbing Hook-up Locations on the Tub
NOTE Model 3750 shown
FIGURE 2.5 Electrical and Plumbing Hook-up Locations on the Tub
Electrical Installation
NOTE For this procedure, refer to FIGURE 2.6 on page
NOTE Use 15 AMP GFCI breaker only
DANGER
8. Remove the motor cover Detail “C”
Plumbing Installation
DANGER
Post Installation Checklist
SECTION 3-OPERATION
Overview
Disinfecting the Tub Using the Closed Loop System
SECTION 3-OPERATION
NOTE For this procedure, refer to FIGURE 3.1 on page
Opening/Closing the Tub Door
Tub Operation
Opening the Tub Door
Water Temperature Setting
NOTE For this procedure, refer to FIGURE
Flow Water Thermometer Water Temperature Valve
DANGER
NOTE Refer to following chart for shower head adjustment settings
NOTE For this procedure, refer to FIGURE 3.4 on page
Operating Shower/Massage Wand
Filling Tub
NOTE For this procedure, refer to FIGURE
Hydromassage
FIGURE 3.4 Filling Tub
FIGURE 3.5 Hydromassage
SECTION 3-OPERATION
Drain Plug Drain
Whirlpool On/Off Button
SECTION 4-MAINTENANCE
Safety Inspection Checklists
Initially
Before Each Use
Maintenance Overview
Cleaning the Door Seal Gasket
Cleaning Your Tub
Removing Soap Film and Hard Water Deposits
Heavy Duty Cleaning Procedure
SECTION 4-MAINTENANCE
NOTE For this procedure, refer to FIGURE 4.1 on page
Calibrating the Disinfectant Flow Meter
NOTE Equipment needed Bucket or Pail, at least 1 Gallon
Graduated plastic bottle, at least 16 ounces Felt Tip Pen
NOTE Liquid will be heard filling the interior plumbing of the tub
13. Turn the disinfectant valve to the on position
Maintenance Record
MAINTENANCE PERSON
TYPE OF MAINTENANCE PERFORMED
DATE
SECTION 5-TROUBLESHOOTING
SECTION 5-TROUBLESHOOTING
SYMPTOMS
FAULTS
LIMITED WARRANTY
Canada