Recessed Side Entry Bath Tubs
Owner’s Operation and Maintenance Manual
Model Model
DEALER This manual MUST be given to the user of the tub
For further information on this product, please call the following
ACCESSORIES WARNING
Customer Service ‐ 1‐800‐668‐2337 Technical Support ‐ 1‐800‐668‐2337
TABLE OF CONTENTS
TABLE OF CONTENTS
FEATURES
SECTION 2-PARTS AND INSTALLATION
TABLE OF CONTENTS
TABLE OF CONTENTS
Removing Soap Film and Hard Water Deposits
Removing Calcium Deposits, Scale and Lime Build-up
SPECIAL NOTES
Recessed Side Entry Bath Tubs
LABEL LOCATION
LABEL LOCATION
TYPICAL PRODUCT PARAMETERS
TYPICAL PRODUCT PARAMETERS
FEATURES
FEATURES
3750
Shower ON
FEATURES
3800
Shower ON
Whirlpool
Installation
Important Safety Instructions
SECTION 1-GENERAL GUIDELINES
DANGER
Plumbing
Electrical
DANGER
Grounding
DANGER
Maintenance and Inspection
Disinfecting
DANGER
Operation
About Installation
SECTION 2-PARTS AND INSTALLATION
NOTE For this procedure, refer to FIGURE
Parts Information
NOTE Follow recommended floor plan when installing tub FIGURE
Installing the Tub
B. Plumb the supply line to the diverted output port of the mix valve
Electrical and Plumbing Hook-up Locations on the Tub
NOTE For this procedure, refer to FIGURE 2.5 on page
NOTE Model 3750 shown
FIGURE 2.5 Electrical and Plumbing Hook-up Locations on the Tub
NOTE For this procedure, refer to FIGURE 2.6 on page
Electrical Installation
NOTE Use 15 AMP GFCI breaker only
DANGER
8. Remove the motor cover Detail “C”
DANGER
Plumbing Installation
Post Installation Checklist
Overview
SECTION 3-OPERATION
SECTION 3-OPERATION
Disinfecting the Tub Using the Closed Loop System
Opening/Closing the Tub Door
NOTE For this procedure, refer to FIGURE 3.1 on page
Tub Operation
Opening the Tub Door
NOTE For this procedure, refer to FIGURE
Water Temperature Setting
Flow Water Thermometer Water Temperature Valve
DANGER
NOTE For this procedure, refer to FIGURE 3.4 on page
NOTE Refer to following chart for shower head adjustment settings
Operating Shower/Massage Wand
Filling Tub
FIGURE 3.4 Filling Tub
Hydromassage
NOTE For this procedure, refer to FIGURE
SECTION 3-OPERATION
FIGURE 3.5 Hydromassage
Drain Plug Drain
Whirlpool On/Off Button
Safety Inspection Checklists
SECTION 4-MAINTENANCE
Initially
Before Each Use
Cleaning the Door Seal Gasket
Maintenance Overview
Cleaning Your Tub
Removing Soap Film and Hard Water Deposits
SECTION 4-MAINTENANCE
Heavy Duty Cleaning Procedure
Calibrating the Disinfectant Flow Meter
NOTE For this procedure, refer to FIGURE 4.1 on page
NOTE Equipment needed Bucket or Pail, at least 1 Gallon
Graduated plastic bottle, at least 16 ounces Felt Tip Pen
13. Turn the disinfectant valve to the on position
NOTE Liquid will be heard filling the interior plumbing of the tub
MAINTENANCE PERSON
Maintenance Record
TYPE OF MAINTENANCE PERFORMED
DATE
SECTION 5-TROUBLESHOOTING
SECTION 5-TROUBLESHOOTING
SYMPTOMS
FAULTS
Canada
LIMITED WARRANTY