HP HX2000 Automatically Enabling Service, File Transfer Advanced Settings, Today, Dial-up, Services, Service settings, Networking Server, Networking Server

Using Bluetooth

Automatically Enabling Service

To automatically enable service:

1.From the Today screen, tap the iPAQ Wireless icon in the Command bar.

2.Tap Bluetooth > Settings > Services tab.

3.In the Services box, select the service you want to enable:

File Transfer, Information Exchange, Serial Port, Personal Network Server, Hands free, or Dial-up

Networking Server.

4.The Service settings automatically enable the service and authentication settings. Tap on the appropriate checkbox to change these settings to your preference.

5.Tap OK to return to the iPAQ Wireless Screen if you enabled Personal Network Server or Dial-up Networking Server.

Note: If you select Authorization required in the Service Settings, you must authorize each connection. Your Pocket PC will then always ask you if the connection should be permitted.

If you enabled File Transfer, Information Exchange, Serial Port, or Hands free, tap the Advanced... button and follow the directions below for the appropriate service setting.

File Transfer Advanced Settings

When you enable File Transfer, you need to set a shared folder from which to transfer outgoing or in which to receive incoming files.

1.Tap the folder icon and locate a desired file folder.

2.Tap OK to save the settings and exit the screen.

3.Tap OK again to return to the iPAQ Wireless screen.

User’s Guide 9–7