Using Security Features
Note: Maintain a firm, consistent pressure against the sensor when swiping a finger. One way to do this is to press your thumb against the bottom of the iPAQ Pocket PC while swiping your index finger. You should begin the swipe at the first joint of your finger and continue downward with a smooth slow motion, taking one to two seconds to complete the swipe.
If you need additional assistance at any time, tap the Training button.
3.Monitor the status to see if your fingerprint was correctly swiped.
4.Repeat steps 2 and 3 to continue enrolling your fingerprint.
5.When that fingerprint is enrolled successfully, repeat steps 1 through 4 to enroll a second fingerprint.
6.When both fingerprints are successfully enrolled, tap OK twice to continue setting up HP ProtectTools.
User’s Guide |