Using Wi-Fi (not available on all models)
Powering Wi-Fi On or OffTo use Wi-Fi on your HP iPAQ, you need to turn on Wi-Fi and set up your device.
Note: The Wi-Fi antenna for the HP iPAQ is located in the top of the device. If you cover up the top of the HP iPAQ after you have turned on Wi-Fi, signal strength may be affected.
To turn the Wi-Fi on or off:
1.From the Today screen, tap the iPAQ Wireless icon (
) in the Command bar located at the bottom of the screen.
2.Tap the Wi-Fibutton.
When Wi-Fi is powered on, the Wi-Fiicon on the iPAQ Wireless screen turns from gray to amber, and the Wi-Fi light-emitting diode (LED), located on the top left corner of the device, flashes blue indicating one or more radios are on. When a wireless connection is made, the Wi-Fiicon on the iPAQ Wireless screen turns from amber to green.
Note: Even though the LED flashes blue to indicate Wi-Fi is turned on, it does not necessarily mean a connection has been established with another device or access point.
If Wi-Fi is off, the Wi-Fiicon turns from green or amber to gray.
Note: Some Access Points and networks do not support one or more of the power saving modes that are available. If you cannot connect with a particular wireless network, try turning off the Wi-Fi Power Save modes.