HP Integrity Essentials Pack for Linux Software Before Running the Installer, Running the Installer, Installing Software from the HP Support Pack, #export JAVA_HOME="javaDir, # echo 1 >/selinux/enforce

3.Set execute permissions on the downloaded file:

#chmod a+x jrockit-R27.5.0-jdk1.5.0_14-linux-ipf.bin

4.Run the self-extracting binary to extract the RPM file:

#./jrockit-R27.5.0-jdk1.5.0_14-linux-ipf.bin

NOTE: The initial "./" is required if you do not have "." (a period) in your PATH environment variable.

A binary license agreement is displayed.

5.You must agree to the BEA JRockit 5.0 JDK license agreement to proceed with the installation.

NOTE: The default installation path is /root/jrockit-R27.5.0-jdk1.5.0_14, which can be modified during the installation process. A good location to install the JRockit 5.0 JDK is /usr/local/. Use this information when setting the JAVA_HOME environment variable in the next step.

6.Set the JAVA_HOME environment variable:

#export JAVA_HOME="javaDir"

where javaDir is the directory in which the BEA JRockit 5.0 JDK files were installed. For example, /root/jrockit-R27.5.0-jdk1.5.0_14.

NOTE: The JAVA_HOME environment variable must be exported in this fashion prior to, and in the same shell session as, the use of the HP Support Pack installer.

7.If your system is running RHEL5U1, you must re-enable SELinux. Otherwise, bypass this step.

# echo 1 >/selinux/enforce

Installing Software from the HP Support Pack

The software included in the HP Support Pack is installed by running the interactive installer install.sh. This installer provides options for installing one or more of the products described in “Software Provided in the HP Support Pack” (page 41).

Before Running the Installer

Before running the installer, perform the following steps:

1.Review the “Product Installation Dependencies” (page 44) section and ensure that you prepare your system accordingly.

2.Ensure that you have the latest version of the product as described in “Obtaining the Latest HP Insight Foundation Suite for Integrity with Linux” (page 19).

3.Log in to the system as root.

4.Mount the media containing the HP Support Pack or identify the directory into which the tar file was unpacked.

Running the Installer

You can run the installer anytime after the OS has been installed; however, HP recommends that you run the installer immediately after the initial installation of the OS.

To install software from the HP Support Pack , perform the following steps:

46 Installing and Using the HP Support Pack