HP Integrity Essentials Pack for Linux Software manual # ./install.sh, Menu for RHEL4

1.Start the installer:

#./install.sh

The following message is displayed:

Welcome to the HP Insight Foundation suite for Integrity with Linux version *.**.

For the latest information and downloads go to http://www.hp.com/go/integritylinuxessentials. Press <enter> to continue the installation of the current version of the HP Support Pack.

2.You are prompted to make additional selections based on the software update option you selected in the previous step.

The installer analyzes your system and prepares it for installation of the products provided with the HP Support Pack.

NOTE: If the installer detects missing RPMs that are necessary to the installation, messages are displayed indicating which RPMs you must install before proceeding. For example, messages similar to the following may appear:

hpima will not be available because the following required RPMs are missing:

net-snmp sensors

hpsmh will not be available because the following required RPMs are missing:

net-snmp sensors

In this case, you would need to install the required RPMs for HP-IMA and HP SMH before these products can be installed.

NOTE: If the installer detects missing JAVA or JAVA not configured, messages are displayed indicating which RPMS you can not install. For example, messages similar to the following may appear:

hpsmh-tomcat cannot be installed because Java not installed hp.com-parmgr cannot be installed because Java not installed

The nPartition Management GUI for HP Integrity servers. cannot be installed for the following reasons: The following IFIL dependencies have been excluded: hpsmh-tomcat hp.com-parmgr

In this case, you would need to install JAVA and configure JAVA for hpsmh-tomcat and hp.com-parmgr.

A menu of available products and options that can be installed is displayed. The contents of this menu depend upon the version of the HP Support Pack that you are installing or the Linux distribution installed on your system. A menu similar to one of the following is displayed:

Menu for RHEL4:

1.Install HP Utilization WBEM Provider

2.Install HP Management Base for Integrity and Proliant Servers

3.Install HP System Management Homepage

4.Install MPT Fusion SAS Integrated RAID configuration utility

5.Install The Open64 Compiler Suite v4.2.1

6.Install HP Command Line Array Configuration Utility

7.Install HPVM Guest Kit for Linux

8.Install HP Insight Manager Agents (SNMP) for HP Integrity servers

9.Install HP Insight Manager Agents Webapp via

HP SMH.

10.Install nPartition Commands

11.Install The nPartition Management GUI for HP Integrity servers.

12.Install HP WBEM Providers for Linux

13.Install Everything

14.Uninstall IFIL and return to this menu

15.Exit

Installing Software from the HP Support Pack 47