Removal and Replacement Procedures
2.Disconnect the speaker cable 1 from the system board.
3.Lift the speaker 2 straight up to remove it from the top cover.
Removing the Speaker Assembly
Reverse the above procedure to install the speaker assembly.
5.16 RTC Battery
✎The RTC battery is included with all system board spare part kits. Refer to Section 5.19, “System Board,” for spare part number information.
1.Prepare the notebook for disassembly (Section 5.3) and remove the following components:
❏Hard drive (Section 5.4)
❏Switch cover (Section 5.9)
❏Keyboard (Section 5.10)
❏Display assembly (Section 5.11)
❏Base enclosure (Section 5.12)
Maintenance and Service Guide |
