HP L2005CU, L2098XX, L2005US, L2005CM, L2005A3, L2005CO Removing the USB/S-Video Controller Board

Removal and Replacement Procedures

2.Remove the two PM2.0×5.0 screws 1 that secure the USB/S-Video controller board to the top cover.

3.Lift up on the right side of the board 2 to disconnect it from the system board.

4.Remove the USB/S-Video controller board.

Removing the USB/S-Video Controller Board

Reverse the above procedure to install the USB/S-Video controller board.

5–32 Maintenance and Service Guide