HP L2005A3, L2098XX, L2005US, L2005CU, L2005CM, L2005CO Removing a Mini PCI Communications Module

Removal and Replacement Procedures

✎Make note of which wireless antenna cable is attached to which antenna clip on the Mini PCI communications module before disconnecting the cables.

5.Disconnect the wireless antenna cables 1 from the Mini PCI communications module.

6.Spread the two retaining tabs 2 that secure the Mini PCI communications module to the communications compartment socket. (The side of the module opposite the socket rises up).

7.Remove the wireless communications module 3 by pulling the module away from the socket at a 45-degree angle.

✎Wireless communication modules are designed with a notch 4 to prevent incorrect installation into the Mini PCI socket.

Removing a Mini PCI Communications Module

Reverse the above procedure to install a Mini PCI communications module.

5–16 Maintenance and Service Guide