HP L2005CO, L2098XX, L2005US, L2005CU, L2005CM Reverse the above procedure to install a processor

Removal and Replacement Procedures

2.Use a 2.0-mm hex wrench to turn the processor locking screw 1 one-half turn counterclockwise until you feel a click.

3.Lift the processor 2 straight up and remove it.

✎The gold triangle 3 on the processor should be aligned in the left-rear corner when you install the processor.

Removing the Processor

Reverse the above procedure to install a processor.

Maintenance and Service Guide 5–41