5.Connect the circular end of the power supply cord to the DC power IN connector on the back of the monitor. Connect the female end of the
Figure 2-6 Connecting the Power Cord
WARNING! To reduce the risk of electric shock or damage to the equipment:
Do not disable the power cord grounding plug. The grounding plug is an important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily accessible at all times.
Disconnect power from the equipment by unplugging the power cord from the electrical outlet.
For your safety, do not place anything on power cords or cables. Arrange them so that no one may accidentally step on or trip over them. Do not pull on a cord or cable. When unplugging from the electrical outlet, grasp the cord by the plug.
6.If you are using the monitor as a standard single monitor with a desktop computer, connect the VGA cable between the monitor and computer. The video signal is sent over the VGA cable. When using the VGA cable, the port replicator features will not function.
If your are connecting an HP notebook computer to the monitor, connect one end of the provided USB cable to a USB connector on the computer, and the other end to the upstream USB connector on the monitor. The video signal is sent over the USB cable and the port replicator features will be functional. For more information, refer to Connecting an HP Notebook Computer and Installing Drivers on page 9.
DO NOT connect both the VGA cable and the USB cable to the monitor.
7.Connect headphones and/or a microphone to the headphones and microphone jacks on the monitor as needed. As an alternative to headphones, you can connect low wattage speakers to the headphones jack.
Connecting the Monitor Cables | 7 |
