Recognizing Preset Display Resolutions
The display resolutions listed below are the most commonly used modes and are set as factory defaults. This monitor automatically recognizes these preset modes and they will appear properly sized and centered on the screen.
L2311c
Table 6-2 Factory Preset Modes
Preset | Pixel Format | Horz Freq (kHz) | Vert Freq (Hz) | |
|
|
|
| |
1 | 640 × 480 | 31.469 | 59.940 | |
|
|
|
| |
2 | 720 × 400 | 31.469 | 70.087 | |
|
|
|
| |
3 | 800 × 600 | 37.879 | 60.317 | |
|
|
|
|
|
4 | 1024 | × 768 | 48.363 | 60.004 |
|
|
|
|
|
5 | 1280 | × 720 | 45.00 | 60.00 |
|
|
|
|
|
6 | 1280 | × 1024 | 63.981 | 60.02 |
|
|
|
|
|
7 | 1440 | × 900 | 55.935 | 59.887 |
|
|
|
|
|
8 | 1680 | × 1050 | 65.29 | 59.954 |
|
|
|
|
|
9 | 1920 | × 1080 | 67.50 | 60.00 |
|
|
|
|
|
Entering User Modes
The video controller signal may occasionally call for a mode that is not preset if:
●You are not using a standard graphics adapter.
●You are not using a preset mode.
It this occurs, you may need to readjust the parameters of the monitor screen by using the
Energy Saver Feature
The monitors support a reduced power state. The reduced power state will be entered into if the monitor detects the absence of either the horizontal sync signal and/or the vertical sync signal. Upon detecting the absence of these signals, the monitor screen is blanked, the backlight is turned off, and the power light is turned amber. When the monitor is in the reduced power state, the monitor will utilize 1 watt of power. There is a brief warm up period before the monitor will return to its normal operating mode.
Refer to the computer manual for instructions on setting energy saver features (sometimes called power management features).
NOTE: The above power saver feature only works when connected to computers that have energy saver features.
Recognizing Preset Display Resolutions 25
