2 Connecting to a Netware 4.11 Server

Windows for Workgroups Version 3.11

Windows for Workgroups Version 3.11

2 Connecting to a Netware 4.11 Server

Requirements

•HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.

•Intel EtherExpress Pro 10+ ISA 10MBS Ethernet adapter card and drivers disk.

•Vectra VL8 and VL7 Driver Name: EPRO.386 Size: 16K Date: 10/22/96

•Vectra VE7/VE8 Driver Name: EEPRODI.INS Size: 784B Date: 10/26/95

•Novell Netware 4.1 server that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

•Netware Client for DOS and MS Windows

Device Configuration

 

 

 

Vectra VL8

Vectra VL7

 

Vectra VE7/VE8

 

 

 

 

 

 

 

 

I/O Address

 

210-21Fh

210-21Fh

 

300-30Fh

 

 

 

 

 

 

 

 

Interrupt

 

10

10 (16 bit only)

 

11 (16 bit only)

 

 

 

 

 

•

Board Connector type

Auto-detect

•

Force 8-bit

operation

Yes

 

•

Flash chip address

Disabled

•

Remote boot program

None

 

Procedure

1With the HP Vectra turned off, install the Intel EtherExpress PRO 10 ISA Ethernet adapter card into an ISA slot.

2Connect network cable media to the Intel EtherExpress card.

3Power on the machine.

4After booting, insert the Intel EtherExpress drivers disk Ver. 3.5”, and execute “A:\SOFTSET2.EXE.”

5Select “Change Adapter configuration” and verify the resource settings