3 Connecting to a Windows NT Server 3.51

Windows for Workgroups Version 3.11

Windows for Workgroups Version 3.11

3 Connecting to a Windows NT Server 3.51

Requirements

•HP Vectra with DOS and MS-Windows for Workgroups 3.11 installed.

•Intel EtherExpress Pro 10+ ISA Ethernet adapter card and drivers disk Ver. 3.5.

•DriverName: EPRO.386 Size: 16K Date: 10/22/96

•Microsoft Windows NT server 3.51 machine that supports Net BEUI, NWLink IPX/SPX, and NWLink NetBIOS transfer protocols.

Device Configuration

 

 

 

Vectra VL8

Vectra VL7

 

Vectra VE7/VE8

 

 

 

 

 

 

 

 

I/O Address

 

210-21Fh

210-21Fh

 

300-30Fh

 

 

 

 

 

 

 

 

Interrupt

 

10

10

 

11(16 bit only)

 

 

 

 

 

 

•

Board Connector type

 

Auto-detect

•

Force 8-bit

operation

 

Yes

•

Flash chip address

 

Disabled

•

Remote boot program

 

None

Procedure

1With the HP Vectra turned off, install the Intel EtherExpress PRO ISA Ethernet adapter card into an ISA slot.

2Connect network Cable Media to the Intel EtherExpress card.

3Power on the machine.

4After booting, insert the Intel EtherExpress drivers disk Ver. 3.5”, and execute “A:\SOFTSET2.EXE.”

5Select “Change Adapter configuration” and verify the resource settings listed above under the heading “Device Configuration.”

6If changes are required, save those changes and exit.