HP m1070n, m1050y (PJ697AV), m1000y (D7223L), m1050y (PU127AV), m1080n, m1072n, m1095c manual Make Movie

Make Movie

This is the final step of your DVD project. You select a format, the type of TV system, and volume name.

1 If your project is already open, click the Make Movie button and skip to step 5.

2 Click Start, choose All Programs, Video, InterVideo WinDVD Creator, and then click InterVideo WinDVD Creator again.

3 Select the Open existing project button and select your project.

4 Click the Make Movie button.

5 Insert a blank recordable DVD or CD into your drive.

6 Choose one from each of the following sections (order of selections may differ).

Select	Function
Format	Select one of the formats to
	record your project.
TV System	Select between NTSC and
	PAL for your TV system.
	The NTSC format is used
	in North America, and the
	PAL format is used in
	European and Asian
	countries/regions.
Volume	Enter a Volume name for
Name	your disc (optional).
of Disc
Select	Select the device that
Device	contains the blank
	recordable DVD or CD.
Burning	Select the speed to use
Speed	when recording your
	project.
Burn to	Select where you would
Disc	like the file to be recorded:
	Burn to Disc: Use this
	to burn directly to a DVD
	or CD.
	Write content to hard
	disk for later burning:
	Use this to create the file
	on your hard disk drive.

7 Click the right arrow and then click Start. 8 Click OK.

Creating DVD Movies 145