Cleaning Page
Use the Cleaning Page feature to remove excess toner and paper particles that accumulate on the fuser assembly and rollers.
Follow these steps to print a Cleaning Page.
1.On the Device Settings tab, press the Start button in the Cleaning Page section. The HP LaserJet Cleaning Utility starts.
2.Make sure the product is idle and the Ready LED on the product is on.
3.Load overhead transparency or copier grade paper (18lb - 24lb or 70g/m2 - 90g/m2) with a smooth surface.
4.Press the OK button. The cleaning process will take about two minutes to finish.
Print Density
Use the Print Density setting to optimize and improve image quality. The default setting for Print Density is 3.
NOTE: Although the product lights are off in
148 Chapter 4 HP host based print driver for Windows | ENWW |