Table
Light status | Error code | State of the product | Action |
|
|
|
|
Attention light is blinking, and ready light is on.
The product has experienced a continual error from which it will recover on its own.
If the recovery is successful, the product continues to the processing data state and completes the job.
If the recovery is unsuccessful, the product continues to the continuable error state. Try removing any media from the media path and turning the product power off, and then on again.
The attention and ready lights are on. E6 | The product has experienced a fatal |
| error from which it cannot recover. |
E7
E8
E9
1.Turn off the product or disconnect the power cord from the product.
2.Wait 30 seconds, and then turn on the product or reconnect the power cord to the product.
3.Wait for the product to initialize.
If the error persists, contact
HP customer support.
Interpret
Alert and warning messages appear temporarily and might require you to acknowledge the message by pressing the OK button to resume or by pressing the Cancel 
button to cancel the job. With certain warnings, the job might not complete or the print quality might be affected. If the alert or warning message is related to printing and the
Critical error messages can indicate some kind of failure. Turning off and then turning on the power might fix the problem. If a critical error persists, the product might require service.
Control panel message | Description | Recommended action |
|
|
|
50.X Fuser Error
Turn off then on
The product has experienced an internal hardware error.
1.Turn off the power by using the power switch, and then wait at least 30 seconds.
2.If a surge protector is being used, remove it. Plug the product directly into the wall socket.
3.Turn on the power and wait for the product to initialize.
If the error persists, contact HP. See www.hp.com/support/ljm1210series or the support flyer that came in the product box.
30 Chapter 1 Purpose and scope | ENWW |