HP m270n, m280n, 894c Connecting the Signal Source, Setting, Select the signal, source for TV in

Connecting the Signal Source

This section describes connecting the signal source for TV.

Connect the signal source for the TV by using the TV (in) coaxial connector or the S-VID IN (s-video) connector:

■Plug the connector of a coaxial cable from your TV antenna or from your TV cable (wall or set-top box) into the TV connector on the back of the PC, and then turn the connector to tighten it.

Or

■Plug a cable into the S-VID IN connector on the back of the PC: use an s-video cable (not provided) or use the s-video to composite video adapter cable and the composite video cable. Plug the other end of the cable into your set-top box, VCR, or other device that is providing the signal source for the TV.

You can also plug audio cables (not provided) from your set-top box or VCR into the Audio in right (red) connector and the Audio in left (white) connector on the back of the PC.

Left audio in		S-VID IN
(white)		(s-video)
	Right audio in
	(red)		TV in

￿	Setting
Select the signal	Up
source for TV in
the Media Center
program settings.

11