HP 854n, m280n, m270, 894c CD and DVD Drives, Hardware, Handling a CD or DVD, Inserting a CD or DVD

CD and DVD Drives

Your PC comes with one or two of the following optical drives:

■CD-RW

■DVD-ROM

■DVD+RW/+R

■combo (DVD/CD-RW)

■Do not touch the unlabeled side of a CD or place the unlabeled side down on your desk. Doing so could scratch the surface of the CD.

■Store CDs at room temperature.

Eject button

Hardware

ACD-RW drive may be labeled cd writer plus. A DVD+RW/+R drive may be labeled dvd writer. The combo drive may be labeled dvd/cd writer plus.

Handling a

CD or DVD

To avoid damaging CDs or DVDs, follow these guidelines:

■Return the disc to the case when you are finished using it.

■Handle the disc by its outside edges or center hole only.

Inserting a

CD or DVD

1 Make sure the computer is on. (If the PC is in standby mode, the On button light flashes; press the Esc key on the keyboard to wake the PC.)

2 Press the Eject button on the drive to eject the tray. (Or, press the Eject button for the drive on the keyboard.)

3 Holding on to the disc edges only, gently place the disc in the tray with the label facing up.

4 Close the disc tray by gently pushing the tray into the computer. (Or, press the Eject button for the drive on the keyboard.)

Push to close

￿

There can be a delay of several seconds after inserting a CD or DVD until the appropriate program opens.

41