HP 854, m280n, m270 Troubleshooting, Problem, Solution, My computer won’t turn on at all, Support

Troubleshooting

	For help on general and miscellaneous problems you may be experiencing with
	the PC, refer to the following pages for possible solutions. Look up the description
	of the problem and try the solution listed. For more detailed information, press the
	Help button on your keyboard, or click Start on the taskbar and select Help and
	Support.
Problem	Solution

My computer won’t turn on at all.

■When you press the On button on the front of the computer, the following events should happen:

1The keyboard indicator lights flash.

2The light next to the diskette drive flashes.

3The hard disk spins or the diskette drive makes a noise.

4The computer makes one beep indicating it is operating properly.

■If the computer doesn’t go through the previous procedure, check the following:

1The power cord and all cables are securely plugged into the computer.

2The power cord is plugged into a grounded outlet. Check to see whether the outlet works by plugging another item into it.

3The monitor is connected to the computer, plugged in, and turned on.

￿

Your system is provided with a voltage select switch for use in

a 115 or 230 VAC power system. The voltage select switch has been pre-set to the correct voltage setting for use in the particular country/region where it was initially sold. Changing the voltage select switch to the incorrect position can damage your PC and void any implied warranty.

Troubleshooting

59