Removal and Replacement Procedures

Universal Hot-Plug Tape Drive

To remove the component:

CAUTION: To prevent improper cooling and thermal damage, do not operate the system unless all bays are populated with either a component or a blank.

CAUTION: Installation of the tape drive height converter is permanent. Attempting to remove the converter after installation voids the tape drive warranty.

1

2

To replace the Universal Hot-Plug Tape drive:

1.Install a new tape drive height converter on the replacement tape drive.

2.Slide the tape drive into the bay until it locks into place.

CAUTION: Data loss can occur if the drive is not firmly seated.

HP StorageWorks Modular Smart Array 500 System Maintenance and Service Guide

2-7