Removal and Replacement Procedures

2-Port and 4-Port Shared Storage Modules

To remove the component:

1.Power down the system. Refer to “System Power Down” in this chapter.

2.Disconnect the SCSI cabling connected to the 2-Port Ultra3 SCSI I/O module.

3.Remove the module.

1

2

To replace the component, reverse the removal procedure.

If you are replacing a failed 2-Port Shared Storage Module with a 4-Port Shared Storage Module, refer to the 4-Port Shared Storage Module Installation Instructions that ship with the option.

2-14

HP StorageWorks Modular Smart Array 500 System Maintenance and Service Guide