Removal and Replacement Procedures
To remove the component:
1.Disconnect the power cord from the power supply.
2.Remove the blower. Refer to “Blower” in this chapter.
3.Remove the power supply.
1
2
To replace the power supply:
1.Lift the locking latch.
2.Slide the power supply into the bay until it locks into place.
3.Install the blower on the power supply.
4.Connect the power cord.
If you are replacing AC power supplies with DC power supplies, refer to the DC Power Supply Option Installation Instructions that ship with the option.
HP StorageWorks Modular Smart Array 500 System Maintenance and Service Guide |