Removal and Replacement Procedures

Power Button/LED Assembly

To remove the component:

1.Power down the system. Refer to “System Power Down” in this chapter.

2.Remove the hot-plug SCSI hard drives in bays 10 through 14. Refer to “Hot-Plug SCSI Hard Drive” in this chapter.

IMPORTANT: To press the plastic latches behind the front bezel, you may choose to use a flat-head screwdriver.

3. Remove the power button/LED assembly:

1

2

1

To replace the component, slide the power button/LED assembly into the bay until it locks into place.

2-16

HP StorageWorks Modular Smart Array 500 System Maintenance and Service Guide