Issue 6 | Software RAID 5 not supported | |
|
|
|
| Description | HP and Novell have discovered issues where failed drives in software RAID 5 |
|
| environments may not properly rebuild and data corruption may occur. |
|
|
|
| Workaround | Use software RAID 0 or 1, or use hardware RAID 5 as an alternative. |
|
|
|
| Solution | Novell is communicating to customers that software RAID 5 will not be supported until the |
|
| release of SP1 or later. Software RAID 0 and 1 are fully supported with the base media. |
|
| |
Issue 7 | Improper iSCSI configuration can lead to data corruption | |
|
|
|
| Description | Improper configuration of iSCSI Target and Initiator access can cause data corruption. |
|
|
|
| Workaround | Novell has detailed documentation on how to properly configure iSCSI Targets and |
|
| Initiators. The documentation can be viewed at www.novell.com/documentation. |
|
|
|
| Solution | Follow the Novell documentation. Novell is also planning to add additional measures in |
|
| Support Pack 1 (SP1) to help prevent this problem. |
|
| |
Issue 8 | Insight Manager Web Agent may hang the server | |
|
|
|
| Description | Attempting to access the HP Insight Manager Web Agent from the server browser may |
|
| cause the server to hang. This problem only appears in the server browser and does not |
|
| occur when accessing the Web Agent from a |
|
|
|
| Workaround | Do not attempt to access the Web Agent from the server browser. Use a workstation |
|
| browser instead. |
|
|
|
| Solution | This is a known issue with HP’s implementation of the Web Agent module and will not be |
|
| fixed. |
|
| |
Issue 9 | Unloading ACPIMGR.NLM will cause the server to abend | |
|
|
|
| Description | Unloading the support module ACPIMGR.NLM will cause the server to abend. |
|
|
|
| Workaround | Do not unload ACPIMGR.NLM. |
|
|
|
| Solution | Novell is planning to fix this issue in SP1. |
|
| |
Issue 10 | Unpredictable behavior with the ATI Rage XL 8 MB video driver | |
|
|
|
| Description | The ATI Rage XL 8 MB video driver may cause unpredictable behavior in the server GUI. |
|
| Selection of this driver on supported servers may cause problems varying from loss of |
|
| keyboard and/or mouse functionality to server hangs and abends. This problem is |
|
| intermittent. |
|
|
|
| Workaround | See Solution. |
|
|
|
| Solution | Use the default video driver that is automatically selected during installation. Novell has |
|
| decided to archive this driver, so it will no longer be maintained and it will be removed |
|
| from the Novell Overlay CDs for SP1 and later. This driver will remain on the base |
|
| media; however, it should not be used. |
|
| |
Issue 11 | Server may hang with large NSS | |
|
|
|
| Description | The NSS file system can hang if the SET parameter "NSS Read Ahead" is set to a value |
|
| greater than 128. The server will appear to be functioning, but no disk activity can be |
|
| completed due to constrained resources as a result of the parameter setting. |
|
|
|
| Workaround | Set the "NSS Read Ahead" parameter to a value of 128 or less. |
|
|
|
| Solution | Novell is planning changes for SP1 that will properly comprehend settings greater than |
|
| 128. |
|
|
|
|
| 17 |
