Retract the anti-tip foot, if desired

HP P4459A 8-Port Fibre Loop Switch Installation & Operation Guide

Plugging in the other end of the power cord will apply power to the switch. You can do either of the following:

•Connect the other end of the power cord to the power receptacle on the rack, which means you will hot-plug devices to the switch.

•Wait to plug in the other end of the power cord, so that you can con- nect devices to the switch before you power it.

2.If you purchased a filler panel separately, install the filler panel on the front of the rack by pressing it into place, as shown in Figure 16.

Figure 16: Installing the Filler Panel (Shown for HP Rack System/E and HP Rack System/U Racks)

Right Front Rack Column

Filler Panel

Right Rear Rack Column

Switch

Left Front Rack Column

Left Rear Rack Column