HP P4459A manual Mark the Rack Column Holes, Place the Barrel Nuts on the Rack Columns

HP P4459A 8-Port Fibre Loop Switch Installation & Operation Guide

Figure 8: Marking Holes and Attaching Barrel Nuts on HP Rack System/E and HP Rack System/U Racks

Right Rear Rack Column

EIA Unit

Barrel Nuts

Left Rear Rack Column

Step 2: Mark the Rack Column Holes

Use tape or a marking pen to mark the screw holes where you will install the barrel nuts:

•On each rear rack column, mark the top and bottom holes of the EIA unit on the inside of the column, as shown in Figure 7 and Figure 8.

•On each front rack column, mark the hole on the middle of the EIA unit on the inside of the column.

Step 3: Place the Barrel Nuts on the Rack Columns

1.Identify the six barrel nuts by referring to Figure 7 and Figure 8.

18