2000 Series Stapler

Step No. 1 – Grasp the stapler firmly with one hand. Depending on the model,either squeeze the latch with your small finger or press it with your thumb With your other hand, pull the magazine back towards you.

Step No. 2 – Insert the fastener strip into the magazine rail.

Step No. 3 – Push the magazine firmly towards the front of the tool until it locks in place. The tool is now ready for use.

6000 Series Strip Nailer

Step No. 1 – Grasp the nailer handle firmly. Pull the magazine follower all the way to the rear of the magazine and pivot it downward until it latches into the locked position.

Step No. 2 – Insert the a strip of fasteners into the top of the magazine with the point of the nails facing the nose area.

Step No. 3 – Pivot the follower upward until it releases then slide the follower forward until it contacts the fasteners. The tool is now ready for use.

11

Page 11
Image 11
HP Paslode 403606-10 manual Series Stapler