HP Phoneline Gateway hn200p LAN indicators, LAN, WAN, HPNA, Power

phoneline gateway front panel LEDs

Phoneline Gateway Front Panel LEDs

LAN

WAN

HPNA

POWER

LAN indicators

Power

Green. The Power LED lights green when the Gateway is powered on. There is no ON/OFF switch; plug or unplug the power to turn Gateway on or off.

LAN

Green. If the LAN LED is continuously lit, the Gateway is successfully connected to the device plugged into that port (1, 2, 3, or 4). If the LED is flickering, the Gateway is actively sending or receiving data through that port.

WAN

Green. The wide area network WAN LED lights when a successful connection is made between the Gateway and the Internet through your broadband modem.

HPNA

Green. The HPNA LED lights up when the HPNA port connects successfully to your home phoneline network.

Contents

model hn200p acknowledgements and notices Warning: contents Page introduction Page getting to know the phoneline gateway phoneline gateway ports Reset button LAN indicators Page Page Page gateway system tray application Yellow: connection to Gateway lost Page Caution: Page Page Check for upgrade Internet speed meter Gateway control panel Save the current Gateway configuration Browse Save Restore a previous Gateway configuration Internet connection diagnostic Internet connection diagnostic Start Page Get current network status Notify me when network events occur About HP Digital Home Networking Exit Page gateway control panel Start > Programs > HP Digital Home Networking > Gateway Control Panel 3 Select Gateway control panel Hint Apply button OK button Cancel button My Network tab Password tab Internet Access tab Application Access tab Application Hosting tab Expert Interface tab FAQ & Troubleshooting tab Remote Support tab frequently asked questions (FAQs) Page Reset Autonegotiate I am behind a firewall or proxy no idea No Proxy Server File>Preferences Page Page Page troubleshooting Page appendix: the expert interface Help Page Obtain an IP Address Automatically Specify an IP address PPPoE Connect on Demand Keep Alive Disable RAS Status Password Filters Setup Page DHCP DHCP Clients Table Log Incoming Access Log Outgoing Access Log Page filters Page Edit MAC Filter Setting http://[WAN IP Address]:8080 1 Select Enable forwarding port triggering 1Click Port Triggering Close Window dynamic routing static routing Static Routes 2Click Delete this Entry DMZ host MAC address clone Page Page specifications Page glossary client/server network CSMA/CD (Carrier Sense Multiple Access/Collision Detect) default gateway DHCP (Dynamic Host Configuration Protocol) DCHP Client DNS (Domain Name System) DSL (Digital Subscriber Line) DSSS (Direct Sequence Spread Spectrum ) dynamic IP address ESS (Extended Service Set) FHSS (Frequency Hopping Spread Spectrum) firewall firmware FTP (File Transfer Protocol) gateway Internet intranet IP (Internet Protocol) address IPSec (Internet Protocol Security) IPX (Internet Packet eXchange) network network adapter network mask NIC (Network Interface Card) PCI (Peripheral Component Interconnect) PPTP (Point-to-PointTunneling Protocol) print server protocol proxy server ring topology server SPI (stateful packet inspection) spread spectrum SSID (Service Set ID) SSL (Secure Sockets Layer) TCP/IP (Transmission Control Protocol/Internet Protocol) TFTP (Trivial File Transfer Protocol) token ring topology topology URL (Uniform Resource Locator) Page index Page regulatory notices