phoneline gateway
Crossover Switch
The Crossover Switch (X II) toggles the LAN Port between crossover mode (X) and
❑When connecting the Gateway directly to a computer or to an uplink port via the LAN port, choose crossover.
❑When connecting any other configuration, choose
Power
You will connect the included AC Power Adapter to the Power port.
Reset button
To refresh Gateway connections and attempt to fix routing problems, very briefly depress the Reset button with a paper clip or pencil tip.
If you have exhausted all troubleshooting options (see the troubleshooting section of this user’s guide) and continue to experience serious routing problems, depress the Reset button for about five seconds to clear all of the Gateway data and restore the factory default settings.
Warning: Resetting the Gateway may create conflicts between your PC’s actual IP addresses and what the Gateway expects them to be. You may be forced to restart the entire system.
If the Gateway locks up, unplug the Power Adapter from the Gateway’s Power Port for 3 to 5 seconds (but not longer) and then plug it back in. Leaving the power off for too long could result in the loss of network connections.
8
