PRO RX Installation and User’s Manual

1.2.System Requirements

Operating Systems:

•Windows XP / Vista / 2003/ 2000 / 32 & 64-bit.

•Mac OS X 10.4 or higher.

•Apple Power Mac G5 with one available PCI-e x8 slot.

•Apple Mac Pro with one available PCI-e x8 slot.

•Windows compatible PC with one available PCI-e x8 slot.

•Internet connection (to download drivers and utilities).

1.3.Technical Support

Phone

818-435-6007

FAX

818-576-0324

E-mail

support@dulcesystems.com

Web

www.dulcesystems.com

If the product requires service, please contact Dulce Systems’ Technical Support and obtain an RMA number. Ship the product properly packaged to:

Dulce Systems

Attn: RMA

9620 Topanga Canyon Place,

Suite E

Chatsworth, CA 91311

Page 8

PRO RX Installation and User’s Manual

2. Getting Started

The PRO RX comes pre-assembled and almost ready for use, just install the Disk Modules, the PCI-e (PCI-express) Host Bus Extender (HBE), connect the cables, install the software driver and RAID Console. If you are using a Mac, you are good to go, by default the unit is pre-formatted for Mac OS X operation. For Windows, a small format procedure is needed.

2.1.Packaging

Please do not discard the boxes and packing materials in case you might need to reuse them later. Always ship the product in its original packaging. Improperly packaged products will be subjected to shipping damage, for which you will be liable for the repair.

2.2.Check List

•Installation and User’s Manual.

•Power Cord (North America user only).

•Set of keys.

•A 12 or 16 disk bay system enclosure.

•8, 12, or 16 Disk Modules.

•A PCI-e x8 Host Bus Extender card.

•A PCI-e x8 Extender Cable.

•Rackmount rails

Page 9