Configuring
Displaying 802.1X Configuration, Statistics, and Counters
ProCurve(config)# show
Port Access Authenticator Configuration
| Access | Max | Quiet | TX | Supplicant | Server | ||
Port | Period | Control | Reqs | Period | Timeout | Timeout | Timeout | |
1 | No | Auto | 2 | 60 | 30 | 30 | 30 | |
2 | No | Auto | 2 | 60 | 30 | 30 | 30 |
Table
Field | Description |
Whether 802.1X authentication is enabled or disabled on specified port(s). | |
authenticator activated |
|
Port | Port number on switch. |
Period of time (in seconds) after which clients connected to the port need to be re- | |
| authenticated. |
Access Control | Port’s authentication mode: |
| Auto: Network access is allowed to any connected device that supports 802.1X authentication |
| and provides valid 802.1X credentials. |
| Authorized: Network access is allowed to any device connected to the port, regardless of |
| whether it meets 802.1X criteria. |
| Unauthorized: Network access is blocked to any device connected to the port, regardless of |
| whether the device meets 802.1X criteria. |
Max reqs | Number of authentication attempts that must |
| authentication session ends. |
Quiet Period | Period of time (in seconds) during which the port does not try to acquire a supplicant. |
TX Timeout | Period of time (in seconds) that the port waits to retransmit the next EAPOL PDU during an |
| authentication session. |
Supplicant Timeout | Period of time (in seconds) that the switch waits for a supplicant response to an EAP request. |
Server Timeout | Period of time (in seconds) that the switch waits for a server response to an authentication |
| request. |