HP Q.11. (2510-24) Reading Intrusion Alerts and Resetting Alert Flags, Web: Displaying and Configuring Port Security Features, Security, [Apply Changes]

Configuring and Monitoring Port Security

Web: Displaying and Configuring Port Security Features

The following command serves this purpose by removing 0c0090-123456 and reducing the Address Limit to 1:

ProCurve(config)# port-security a1 address-limit 1 ProCurve(config)# no port-security a1 mac-address 0c0090- 123456

The above command sequence results in the following configuration for port A1:

Web: Displaying and Configuring Port Security Features

1.Click on the Security tab.

2.Click on [Port Security].

3.Select the settings you want and, if you are using the Static Learn Mode, add or edit the Authorized Addresses field.

4.Implement your new data by clicking on [Apply Changes].

To access the web-based Help provided for the switch, click on [?] in the web browser screen.

Reading Intrusion Alerts and Resetting Alert Flags

Notice of Security Violations

When the switch detects an intrusion on a port, it sets an “alert flag” for that port and makes the intrusion information available as described below. While the switch can detect additional intrusions for the same port, it does not list the next chronological intrusion for that port in the Intrusion Log until the alert flag for that port has been reset.

9-17