HP Q.11. (2510-24) Building IP Masks, Web: Configuring IP Authorized Managers, Add, Delete, Replace, Security, 2.Click on [Authorized Addresses]

Using Authorized IP Managers

Web: Configuring IP Authorized Managers

Web: Configuring IP Authorized Managers

In the web browser interface you can configure IP Authorized Managers as described below.

To Add, Modify, or Delete an IP Authorized Manager address:

1.Click on the Security tab.

2.Click on [Authorized Addresses].

3.Enter the appropriate parameter settings for the operation you want.

4.Click on [Add], [Replace], or [Delete] to implement the configuration change.

For web-based help on how to use the web browser interface screen, click on the [?] button provided on the web browser screen.

Building IP Masks

The IP Mask parameter controls how the switch uses an Authorized Manager IP value to recognize the IP addresses of authorized manager stations on your network.

Configuring One Station Per Authorized Manager IP Entry

This is the easiest way to apply a mask. If you have ten or fewer management and/or operator stations, you can configure them quickly by simply adding the address of each to the Authorized Manager IP list with 255.255.255.255 for the corresponding mask. For example, as shown in Figure 10-3on page 10-7,if you configure an IP address of 10.28.227.125 with an IP mask of 255.255.255.255, only a station with an IP address of 10.28.227.125 has management access to the switch.

10-9