Configuring Username and Password Security

Configuring Local Password Security

To Remove Password Protection. Removing password protection means to eliminate password security. This command prompts you to verify that you want to remove one or both passwords, then clears the indicated password(s). (This command also clears the username associated with a password you are removing.) For example, to remove the Operator password (and username, if assigned) from the switch, you would do the following:

Press [Y] (for yes) and press [Enter].

Figure 2-3. Removing a Password and Associated Username from the Switch

The effect of executing the command in figure 2-3is to remove password protection from the Operator level. (This means that anyone who can access the switch console can gain Operator access without having to enter a user- name or password.)

Web: Setting Passwords and Usernames

In the web browser interface you can enter passwords and (optional) user- names.

To Configure (or Remove) Usernames and Passwords in the WebBrowser Interface.

1.Click on the Security tab.

Click on [Device Passwords].

2.Do one of the following:

•To set username and password protection, enter the usernames and passwords you want in the appropriate fields.

•To remove username and password protection, leave the fields blank.

3.Implement the usernames and passwords by clicking on [Apply Changes].

To access the web-based help provided for the switch, click on [?] in the web browser screen.

2-6