Web and MAC Authentication

Configuring the Switch To Access a RADIUS Server

Configuring the Switch To Access a RADIUS Server

RADIUS Server Configuration Commands

 

radius-server

 

[host <ip-address>]

below

[key < global-key-string >]

below

radius-server host <ip-address> key <server-specific key-string>

3-16

 

 

This section describes the minimal commands for configuring a RADIUS server to support Web-Auth and MAC Auth. For information on other RADIUS command options, refer to chapter 5, “RADIUS Authentication and Account- ing” .

Syntax: [no] radius-server

[host < ip-address >]

Adds a server to the RADIUS configuration or (with no) deletes a server from the configuration. You can configure up to three RADIUS server addresses. The switch uses the first server it successfully accesses. (Refer to “RADIUS Authentication and Accounting” on page 5-1.)

[key < global-key-string >]

Specifies the global encryption key the switch uses with servers for which the switch does not have a server- specific key assignment (below). This key is optional if all RADIUS server addresses configured in the switch include a server-specific encryption key. (Default: Null.)

3-15