Web and MAC Authentication
General Setup Procedure for Web/MAC Authentication
The switch does not allow Web or MAC Authentication and LACP to both be enabled at the same time on the same port. The switch automatically disables LACP on ports configured for Web or MAC Authentication.
Do These Steps Before You Configure Web/MAC Authentication
1.Configure a local username and password on the switch for both the Operator (login) and Manager (enable) access levels. (While this is not required for a Web- or
2.Determine which ports on the switch you want to operate as authentica- tors. Note that before you configure Web- or
3.Determine whether any VLAN assignments are needed for authenticated clients.
a.If you configure the RADIUS server to assign a VLAN for an authen- ticated client, this assignment overrides any VLAN assignments con- figured on the switch while the authenticated client session remains active. Note that the VLAN must be statically configured on the switch.
b.If there is no